User`s manual

CGPrint User’s Manual 11
4.4. Setting paper
(1) Remove the printer cover.
(2) Ensure that the end of the paper is straight or incline.
(3) Insert the end of the paper into the slot of the printer
mechanism.
(4) After turning on the printer, press LF switch until 5 to
6 cm of paper is fed out of the printer mechanism.
(5) Insert paper after moving aside the paper holder in
the direction of the arrow. Then, secure the center of
the roll with the holder.
(6) Then, attach the printer cover so the end of the paper
comes out of the opening in the cover.
Warning : The device should only be used with paper in it otherwise
the lifetime of the ribbon cartridge gets shorter.