Product Description and Structure Brief Description： CGOLDENWALL is a manufacturer specialized in the production of stainless steel high-speed grinder ,we will provide you the Professional Technical Support and Excellent Service when you purchase from us. If you get it from others , you may not get our professional service.And If there is anything we can help you in the use, Just contact us ,our team will give you professional support and after-service.
Content Product Description and Structure...................................................... 1/3 Important Attentions Before Use............................................................. 4 1. Materials ready for grinding................................................................4 2. Recommend grinding capacity one time.............................................4 3. Recommend use time...........................................................................4 Operating Instruction...............
Product Structure： Minor scratches and pits cannot be avoided during the production and processing process, which will not affect the actual use. Please kindly understand it.
Important Attentions Before Use 1. The materials ready for grinding must be dry enough. Wet, moisture or oil materials are not suitable to be ground into powder. Dry the materials as much as possible before grinding, and then grind it when it is completely cool. 2. Recommend grinding capacity one time： Do not fill the grinding tank to full otherwise it will cause overload. The material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank.
4. Check the blade and the nut is loose or not before grinding. To ensure safety, the nut should be tightened before grinding. After long-term use, blades and carbon brushes need to be replaced if they are worn. 5. Don't clean the grinding bin with the water directly. Keep water away the grinding tank and use dried rag or brush to clean the machine. 6. The motor of the grinder is the brush motor, the sparks and the odor is normal when the first several uses.
Operating Instruction 1. Operations Guide: 1. Open the upper cover and put the dried material inside; 2. Close the upper cover tightly; (Please make sure the lid is rotated to the end and locked tightly on the top.) 3. Plug in and turn on the timer switch, then turn on the switch for grinding(Rolling sound will be heard ); 4. Turn off the switch; (When you hear the sound rolling evenly, the material has been grinded into powder, then you can turn off the switch) 5. Disconnect power supply before opening 6.
3. Common Questions： * Why the grinder cannot be started？ First check whether the indicator light is on. If the indicator light is not on, check whether the power supply is plugged in tightly and whether the power cord is damaged (you can replace the power cord of other household appliances). If the indicator light is on, the possible reason is that the induction switch in the two buckles of the cover is not triggered yet. Please make sure the lid is rotated to the end and locked tightly on the top.
Please kindly try to adjust the screws on the two sides.
* What to do if the grinder suddenly stops working? If the grinder stopped working, the reason may be that the blades bottom is stuck or the overload protector function works because of overload and the carbon brush is worn. It's easy to solve this problem.
*Why the motor becomes hot ？ It is normal for the grinding machine to be slightly heat, because the working principle of the machine is to pulverize the material into powder through the high-speed rotation of the blades. The whole process is carried out in the closed grinding bin, which will generate heat and cause the machine to heat up. There may be several reasons for machine overheat: 1）The materials ground is wet, moisture.
Use Step Diagram: Upright Type grinder Swing Type grinder: 11
Grinding Suggestions for Common Materials 1. When using for the first time, please grind the rice and dry tea leaves first about 30 seconds by the machine, which can clean the grinding bin and remove odor, stains. 2. For Grinding Spices (such as: Chili, Pepper, Fennel, Aniseed etc.) The grinding work can usually be completed in 20 seconds, do not take too long. 3. For Grinding Whole Grains ( such as soybeans, rice, millet, black rice, corn, etc.
4. For Grinding Common Herbs, ( such as Ginseng, Astragalus, Ejiao, Gastrodia, etc.) It is recommended to set the grinding time to 1-2 minutes. 5. For Grinding Oily Materials (such as walnuts, sesame, peanuts, etc) Before grinding, it is better to bake the oily materials in microwave (or dry in the sun ,or bake). After the material is completely cool, then you can grind them,more dried more better. Don’t grind for a long time.
6. For Grinding Super-hard Materials (such as pearls, tortoise shells, Tianqi, Panax notoginseng, etc.) It is recommended to crush the materials into small pieces before putting into the machine for grinding. And during grinding, pause about 10 seconds after every 1 minute working. The grinding job can be completed in 2-3 minutes. 7. For Grinding Fibrous Materials (such as Dendrobium， Ganoderma lucidum, etc.
Instructions of Air Overload Protector When blades are jammed in grinding bin, it will happen that air overload protector pop up and the machine automatically cut off the power supply. If this situation happens, turn off the power and check the grinding bin. You just need clean the blades bottom and press the overload protector button again, then the grinder could work well.
How to Clean up the Grinding Bin You can clean up the grinding bin of grinder with a brush first,and then clean it with dry cloth. After using blades for a long time ,you can remove them and clean them with water.(The blades of new grinder must be very tight,you need to use for a long time,then blades can be removed.) Firstly, loosen the nut by using a pincer and remove the blade. Secondly, wipe the grinding bin with a dry rag after removal of the blade, and please do not clean with water directly.
How to Replace the Blade Blade Replacement Use the Blade replacement auxiliary tool to fix the blade, preventing it from rotation. Then rotate counterclockwise with the help of tool, loosen the hex screws on the blade, open the blade to use.
Operating Procedures of Replacing Blades 18
How to Replace Carbon Brushes The upright type grinder: 19
The swing type grinder: 20
Trouble Shooting Trouble The machine does not operate after power on Cause Elimination method (*Please cut off the power when doing following) Poor contact between the plug and Please plug in the power cord and socket check whether the power indicator lights is on. If the indicator does not light, then the power cord is faulty.
Products Recommendation: We have three types of grinders: upright type, swing type and LED type. The cabin of upright type can’t swing, while that of the other type can both swing to make the grinding material more even. The LED type has LED digital display.
23
