Specifications

6 Engine Removal,Inspection & Installation
Cylinder head cover
Cylinder head cover bolt tightening torque:
10N m
NOTE: When tightening the cylinder head
cover bolts, the piston must be at top dead
center on the compression stroke.
zInstall crankshaft C-ring 1.
zInstall lock washer so that it covers the locating pin.
zApply thread locker to the bolts before installing,
and tighten them to the specified torque.
Sprocket bolt tightening torque:15N m
zBend up the lock washer to lock
the bolts.
zClean the mating surface of cylinder head and cylin-
der head cover.
zInstall dowel pin to the cylinder head.
zApply sealant to the mating surface of the cylinder
head cover.
zInstall cylinder head cover bolts, tighten diagonally
to the specified torque.
Apply thread locker