Specifications

Table 17 lists the available Select Network Adapter options and supported features for the R620.
Features
Broadcom
®
5720
Base-T
Intel
®
I350
Base-T
Broadcom
57800 SFP+
Intel X540
Base-T
Ports
4 x 1GbE
4 x 1GbE
2 x 1GbE +
2 x 10GbE
2 x 1GbE +
2 x 10GbE
Supported speed
1Gb
1Gb
1Gb and 10Gb
1Gb and 10Gb
SR-IOV
Not supported
Not
supported
Not
supported
Supported
(10GbE only)
ISCSI HBA
Not supported
Not
supported
Supported
1
Not
supported
EEE
Supported
Supported
Not
supported
Not
supported
FCoE
Not supported
Not
supported
Not
supported
Supported
2
Switch independent
partitioning
Not supported
Not
supported
Supported
3
Not
supported
DCB
Not supported
Not
supported
Not
supported
Supported
4
iSCSI TLV
Not supported
Not
supported
Not
supported
Supported
5
1
Only 10GbE ports have iSCSI HBA support.
2
Only 10GbE ports have FCoE support.
3
Only 10GbE ports have Switch Independent Partitoning support. The maximum number of partitions supported is
four (two partitions per 10GbE port). 1GbE ports do not support switch independent partitioning.
4
Only 10GbE ports have DCB support.
5
Only 10GbE ports have ISCSI TLV support.
With R620, the job of deploying, updating, monitoring, and maintaining the Select Network Adapters
is fast and easy. System management integration features include the following:
 Pre-boot: Use the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level.
 Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-thru feature for sensory information
 Automation of firmware and driver version deployment upon component replacement
 Automatic monitoring of NIC status and notification on SNMP traps