User Manual

Failure to feed automatically 1) The cartridge is caught between the bolt
and the loading port.
a) Due to incorrect loading of cartridges in
the magazine or the charging lever spring
is stuck.
b) Defective magazine.
c) Due to the lack of tension of the
magazine spring or that it is twisted.
2) Chamber, bolt head locking chamber,
bolt head or guides dirty.
1) a) Remove the magazine and tap the rear
end of it against the palm of the hand so as
to correct the positioning of the cartridges.
If this does not solve the problem, empty
the magazine and reload it.
b) Change the magazine.
c) Replace the spring.
2) Clean these four parts.
file:///C|/WINDOWS/Desktop/42.html (2 of 2) [3/23/2002 9:38:05 PM]