User Manual

g) Disassembly of the bolt assembly:

Press down on the head in a longitudinal direction, until it hits against the

back of the bolt carrier; rotate the head 180° in a counterclockwise direction

and remove it (fig. 18 a).

Rotate the firing-pin locking piece, and remove it (fig. 18 b).

Remove the firing-pin and its spring.

h) Disassembly of the firing mechanism:

-- It is not necessary to perform this operation during the normal cleaning of

the weapon. On the other hand, when necessary, the disassembly should be

performed by trained personnel.

-- When the mechanism is very dirty, it can be cleaned with petroleum

removing the entire pistol grip. All that is necessary is to remove the pin that

retains it to the receiver. Once cleaned, dry it perfectly and grease.

file:///C|/WINDOWS/Desktop/version 2 cetme/33.htm [3/23/2002 9:05:59 PM]