User Manual

VII.-- DISASSEMBLY OF THE WEAPON FOR CLEANING
a) Remove the magazine if it is still inserted in the weapon.
b) Be sure that there are no cartridges in the chamber. To do this, pull the
cocking lever to the rear and, check that the chamber is empty, let go of the
lever so that the bolt assembly moves forward.
c) Remove the two buttstock retaining pins, introducing them into the two
drilled holes provided for them in the buttstock.
d) Remove the buttstock assembly with the recoil spring (fig. 17).
e) Rotate the pistol grip forward.
f) With the aid of the cocking lever, move the bolt assembly to the rear and
remove it through the rear of the receiver.
31
file:///C|/WINDOWS/Desktop/version 2 cetme/31.htm [3/24/2002 7:16:36 AM]