User Manual

c) Cleaning the barrel.

With the bolt assembly locked open, introduce the nylon brush through the

muzzle of the weapon and pull it out through the ejection port (fig. 14 c).

Repeat this operation two or three times. The last time, lightly impregnate the

brush with oil, with one of the oil capsules, use the oil to grease the bolt rollers.

To replace the cleaning kit, squeeze both nipples, and once the knife-bayonet

lug is inserted all the way into the sight base, turn it as necessary so that the

nipples fall into place in their corresponding holes.

file:///C|/WINDOWS/Desktop/version 2 cetme/26.htm [3/23/2002 9:00:28 PM]