User Manual

5. Use of the cleaning kit (fig. 14) (a, b and c).
a) Remove the cleaning kit.
With the point of a cartridge, push in on the spring loaded nipple visible in the
drilled hole found at the foot of the front sight (1) and at the same time lightly
twist the knife-bayonet lug (2) until said nipple is retained; than squeeze, again
with a cartridge, the spring loaded nipple found in the drilled oval at the foot of
the sight (opposite to # 1) and continue turning the knife-bayonet lug (2) until
this second tit is retained. Pulling now on the knife-bayonet lug will remove the
cleaning kit.
24
file:///C|/WINDOWS/Desktop/version 2 cetme/24.htm [3/23/2002 8:58:57 PM]