User Manual

3. Grip with trigger mechanism (fig. 7)
The grip is joined at its front end to the receiver via a crosspin that serves as its
rotation point.
At the rear end it is held between the receiver and the buttstock holder.
The grip holds in its upper part the trigger mechanism, that is comprised of the
following principal parts:
Trigger.
Disconnector assembly.
Hammer.
Safety lever.
Ejector.
These parts, with their crosspins and corresponding springs, are mounted in
the trigger pack (b).
The grip and trigger pack are held together by the shaft of the safety (c).
11
file:///C|/WINDOWS/Desktop/version 2 cetme/11.htm [3/23/2002 8:47:16 PM]