User's Manual

Server Port Set the port # of syslog server. The default is 49494.
default The default of logintelval is 0.
Events only Log information print interval is 1min.
Events plus periodic
status
Logint is the setting range of lower interval.
inteval Log interval time setting.
4.6.2 Time Settings
Time Settings
Time Settings Information
SNTP SNTP server enable or disable.
Server Address SNTP server address: the default is 0.pool.ntp.org
Time Zone Time zone selection
Polling Interval Polling interval
Local Time Local time
Display Time Display the time or not
Time Format Time format: 12 hour/24 hour
Daylight Savings Settings