Spec Sheet

SKID UNIT - READY PAC
*CET is a trademark of CET Fire Pumps Mfg Ltd.
75 Hector St., P.O. Box 90, Pierreville (Québec) Canada J0G 1J0 Telephone: [phone] Fax: [phone] www.fire-pump.com
ACCEPT ONLY THE BEST
A C E N T U R Y O F E N G I N E E R I N G F O R T H E B R A V E S T
Other openings will be utilized accordingly when pre-connects, booster reels and other accessories that require pressurized water
are specified.
OTHER VALVES
All valves larger than 1" shall be a fire service type drop out style ball valve which shall have a hard-coated anodized, high-strength,
light-weight aluminum alloy body with rugged stainless steel ball and two PTFE seats.
The valves shall be capable of bi-directional flow with a minimum working pressure rating of 250 psig.
All stainless steel parts shall be made from 300 series material. The valves shall NOT require lubrication of the seats or any other
internal waterway component and shall be capable of swinging out of the attached waterway plumbing for easy maintenance,
with the removal of six (6) to eight (8) bolts.
Any required valve 1" or smaller, unless otherwise specified, shall be a standard plumbing style industrial ball valve.
DISCHARGE VALVES
A 1 1/2" fire grade valve drop out style with handle and 1 1/2" NSTM threads shall be furnished with a cap and chain.
DISCHARGES TO REAR OF UNIT
There shall be one (1) 1" Industrial Ball valve plumbed via high pressure hose from the manifold to the Tank Fill inlet noted on the
tank for the purpose of filling the tank and re-circulating water during stagnant pump operations.
TANK FILL
The water tank shall be supplied with one (1) 1.5" pre-connect tray. The pre-connect tray shall be constructed of 1/2" polypropylene
and shall be approximately 8" wide x 8" high x 48" long. The pre-connect tray shall be constructed in the same manner and with
the same materials as the tank. The pre-connect tray shall welded mounted to the top of the tank and positioned transversely to
the tank.
PRE-CONNECT TRAY