User manual

Specifications
General
Parameter Min. Typ. Max. Unit
Dimensions (L x Wx H) 85 x 21 x 12,4 mm
Cable Length 75 mm
Weigth 65 g
Operating temperature range 0 25 70 C
Analog inputs
Parameter Min.
3
Typ. Max.
3
Unit
Typical input range 0,0 3,3 Volts
Maximum input voltage range
4
-0,2 5,0 Volts
Input bias current 15,0 500,0 nAmperes
Input impedance tbd MOhms
Total unadjusted error +/- 1,5 LSB
Offset error +/- 1 LSB
Gain error +/- 0,5 +/- 1,5 LSB
Differential linearity error +/- 0,7 +/- 1,0 LSB
Integral linearity error +/- 0,8 +/- 1,5 LSB
Noise (peak-to-peak) tbd µV
Effective resolution tbd bits
Noise-free resolution tbd bits
Crosstalk tbd dB
Important: All specifications refer to a current of 0mA at the 5V output (DB9, Pin 1).
Currents below 5mA will typically affect the measurement accuracy by less than 1,5 mV.
Drawing 100mA from the 5 Volt output will typically affect measurement accuracy by
35mV due to voltage drop on the GND wire.
Digital inputs/outputs
Input
Parameter Min.
3
Typ. Max.
3
Unit
Low level input voltage 0,0 0,8 Volts
High level input voltage 2,0 5,0 Volts
Maximum input voltage range
4,,5
-1,0 6,5 Volts
CEBO-STICK Reference Manual Cesys GmbH
[ v1.1 ] 22/28