User manual

onboard memory for a given frame setup. With only one analog input enabled, you can
sample up to 4.095 frames. See the table at the end of this section for further details.
Frame setup Maximum number of
frames for buffered modes
1x analog input 4.095
4x analog input 1.023
Digital port 4.095
4x analog input + digital port + counter 585
Maximum sample rate - continuous DAQ
Frame setup Typ. Max.
3,16
Unit
1 analog input 100.000 Frames/s
2 analog inputs 50.000 76.000 Frames/s
3 analog inputs 33.500 59.000 Frames/s
4 analog inputs 24.000 49.000 Frames/s
Digital port 100.000 Frames/s
4 analog inputs + digital port 20.000 42.500 Frames/s
Workflow
Use the the following steps to setup CEBO-STICK for multi frame data acquisition:
1.) Open device.
2.) Create a list of input signals.
3.) Setup the InputFrame using setupInputFrame() together with this list.
4.) Call one of the Multi Frame DAQ methods:
• startBufferedDataAcquisition()
• startContinuousDataAcquisition()
• startBufferedExternalTimedDataAcquisition()
• startContinuousExternalTimedDataAcquisition()
5.) Read the captured frames using either readBlocking() or readNonBlocking().
6.) Stop the data acquisition using stopDataAcquisition().
7.) Close device.
CEBO-STICK Reference Manual Cesys GmbH
[ v1.1 ] 20/28