User manual

Capture and return a fixed number of frames. The frame acquisition timing is generated by an internal
hardware timer of the CEBO-LC. Frame data is stored in an internal buffer of the CEBO-LC before it is sent to
the host.
When external trigger is enabled, an edge on the TRG input is required to start capturing.
This acquisition mode allows it, to capture data at a higher rate than in continuous mode under some
circumstances (i.e. slow PC or heavy loaded CPU). The number of acquisitions is limited by the buffer size of
the CEBO-LC.
External timed - continuous frames / buffered frames
This acquisition modes are like the comparable hardware-timed modes with one difference: There is no
hardware-timer.
Edges on the TRG input trigger the acquisition of one frame. Falling, rising or both edges can be used to trip
trigger events.
39/63