User manual

Example:
You have two voltages (5V & 11V) relating to mass.
V
in
= 6V & V
cm
= 8V
This point is in no figure inside the hexagon, so you get no valid reading.
Overvoltage protection
CEBO-LC Analog Inputs are rated for 10V with respect to GND. Keep voltages on any Analog Input within
12,3V to guarantee valid readings on adjacent channels. To limit current flow in case of overvoltage an
internal series resistor is added at all input channels. Make sure voltages are within 20V at any time to
17/63