Safety Instructions

14
LIST OF ILLUSTRATIONS
1. The names of basic parts
2. Magazine removal
3. Pistol loading
4. Slide release from its "rear lock-up" position by depressing slide stop
5. Shifting the safety to the "SAFETY-ON" position
6. Release of the hammer to its forward position
7. Positioning of the slide during disassembly
8. Slide stop removal using the magazine base to facilitate this operation
9. Magazine disassembly
ADAPTER FOR CZ KADET IN CALIBRE .22 LR
Adapter for the CZ Shadow 2 and CZ 75 SP-01 Shadow pistol in calibre .22 LR can be
supplied in the following two versions:
1. The adapter itself, which can be mounted on the frame of any CZ Shadow 2 or CZ 75
SP-01 Shadow pistol
2. Complete CZ Shadow 2 or CZ 75 SP-01 Shadow pistol in calibre .22 LR
The main benefits of the adapter include:
- retaining the typical characteristics of the CZ Shadow pistols
- economy of firing - advantageous especially for training
- easy installation of the adapter on the frame without the necessity of additional
alignment
Installation of the adapter
No modifications or additional alignment are necessary for the use of the .22 LR adapter
on an existing pistol. Follow the instructions in Stripping for Cleaning - Disassembly and
remove the existing slide assembly and mount the .22 LR adapter on the pistol frame. The
supplied slide stop marked as "22 LR" and a magazine in calibre .22 LR must be used with
the adapter.
Two colour-coded recoil springs are supplied with the firearm. The one with blue marking
is suitable for weaker versions of .22LR ammunition (e.g. subsonic). The one with red marking
is suitable for more powerful ammunition (e.g. high velocity).