User Manual

17
Cleaning the Firearm
When cleaning and preserving the firearm use only agents designed for this purpose.
The barrels must always be cleaned starting from the chamber towards the muzzle by
means of a cleaning rod with soft surface.
Clean the bore and the chamber immediately after shooting.
Clean the surface of the firearm dry and apply a thin layer of preserving oil. Preserve the
stock and the fore-end with a special wood-protecting agent.
Timely and proper cleaning extends the firearm's service life. Keep the firearm in a dry
place in order to avoid moisture condensation of the wood treatment solution and corrosion of
steel parts.
When your firearm is not in regular use, check it at least once a month and retreat with
proper preserving agent if necessary.
If you do not use the firearm for a long period of time, release the firing mechanism using
the cartridge specifically designed for this purpose.
It is recommended to grease the sliding surface of the extractor and fore-end with a gun
grease.
It is not recommended to clean the firearm with metal brushes. Removal of fouling and
residues should be carried out only with the use of soft (wooden, plastic) tools.
It is recommended to have the firearm inspected and cleaned by a professional workshop
once a year.
The manufacturer cannot be held responsible for firearms repaired by the owners
themselves.
Adherence to these principles and recommendations will ensure faultless functioning of
the firearm.