Instruction Manual

15
OPERATING INSTRUCTIONS
Several Principles of Firing
- Before you start shooting, you must clean the gun's surfaces, including both
cartridge chambers and inner surfaces of barrels, and make sure everything is
dry
- use good-quality, non-corroded cartridges only
- do not use cartridges that have been dropped and are dirty
- always wear suitable ear protectors and eyeglasses when shooting
- do not fire an over-oiled gun
- when firing a single pellet fixed chokes meet CIP regulations for cartridges
designed for smooth bore and choke min. Ø 17,6 mm
- resistance of the preloaded double set trigger is adjusted during production to
1,2 - 3,2 N, the adjustment screw is fixed by a centre punch. We do not
recommend self-adjustment outside this range.
Gun Loading
Using your right thumb, push the bolt handle to the right and by pushing the barrels
down with your left hand you break the gun (Fig. 1). When the gun is being broken, the
barrel band pushes the cocking levers and the striking mechanism is cocked. The gun must
be home broken. When the gun is broken, the bolt handle is kept in the open position with a
breech catch of locking latch. The safety catch is automatically shifted into the locked
position. Insert cartridges into the chambers of the corresponding barrels and shut the gun.
With this movement the breech catch releases the locking latch, which will then lock the
barrels. The double-barrelled gun is fully locked if the bolt handle is positioned at right
angles to the barrel muzzles. If the locking latch is held by the breech catch, it is not
possible to unlock the gun.