Instruction Manual

14
Complete Barrel
Model BO 801
the barrel pair consists of two independent barrels soldered into a casing assembly,
soldered with a central bar in the front part. The forend hook is soldered to the lower barrel.
The aiming rib is soldered to the upper barrel. The casing assembly side walls houses
ejectors mechanism. The ejectors function closely relates to the cocking levers position.
Model BO 802
the barrel pair consists of two independent barrels soldered into a casing assembly,
soldered with a central bar in the front part. The forend hook is soldered to the lower barrel.
The rear sight is on the upper bar, the front sight is situated on an independent base.
Model BO 803
the barrel set consists of two self-supporting barrels soldered into the collar,
interconnected by adjustable span pieces for ensuring their grouping. The forend hook is
soldered to the bottom barrel. The rear sight is mounted on the rib, the front sight is located
on the separate base.
Interchangeable Barrels
optionally, the BO 802 gun can be equipped with additional interchangeable shotgun
barrels either in the delivery or upon request. Interchangeable rifle barrels can be delivered
as well. Inter changeable barrels must be mounted by an authorized company and
presented for work piece certification.
Parts of the gun system are made of construction steel and are heat-treated. The
surface is protected by alkaline oxidation. The gunstock and front stock are made of walnut
and are varnished. Gripping parts are equipped with dovetailing.