User manual

Barrett Technology, Inc.
BA4-310 System User Manual Version 1.1
18
Copy the Torque Ripple data from the disk labeled Torque Ripple Data to the directory
<drive>:\btech\trdata\.
3.3 Electrical Connections
3.3.1 Main AC Power
A 4-conductor AC power cable is provided to connect the control cabinet to a wall source.
Connector details vary from customer to customer and will be determined during the
preparation for installation. The wall source should be sized to supply 20 continuous AC
amperes at 208-220VAC phase-to-phase and 50-60 Hz.
Colors:
GREEN – Connect to earth ground
WHITE
RED Connect to the 3 live phases of AC
BLACK
3.3.2 The Cabinet
Figure 9 shows the locations of all external connection points on the control cabinet. Be sure to
attach all cables to the correct connector securely: