User manual

3.0 USB Drivers Installation

The GPS207DC has a mini-USB style connector inside that is used to program the device. Open the

GPS207DC per the instructions in the GPS-207/GPS-207DC User Manual. Connect the battery if it is not

connected and swing it to the side of the enclosure. This will provide access to the USB connector.

Figure 8: Location of USB Connector inside of the GPS207

The communication process is handled via USB Drivers that create virtual com ports. These virtual com

ports are used to communicate with the device.

To install the drivers connect the GPS-207DC to the computer using a mini-USB to USB cable (CES P/N

CBLxx). When the GPS207DC is connected to the computer for the first time, or to a different USB port,

the user will be prompted to install the drivers.

The Windows operating system automatically detects the presence of a new USB device. The following

screen will be displayed:

Figure 9: Found New Hardware Wizard #1

Select No, not this time and click Next.