User manual

4.3 Configure Menu

The Configure menu has three items on it. They are Com Port, Verify Connected and Connect New

Device.

Figure 33: Configure Menu

4.3.1 Com Port

Refer to Section 4.1 for more information on how to configure the com port.

4.3.2 Verify Connected

To verify that a device is connected and that the com port has been properly configured select Verify

Connected.

If a device is connected and the com port has been properly configured the following dialog will be

displayed.

Figure 34: Device is Connected Dialog

If a device is not connected or the com port has not been properly configured the following dialog will be

displayed.

Figure 35: Device Not Connected or Com Port Not Properly Defined Dialog

4.3.3 Connect New Device

To connect a new device select the Connect New Device menu selection. This is important to do when

programming multiple devices. Select this item and then disconnect the current device. Connect the new

device.