User manual

4.2.3 Save As

To save the current configuration in a new file select Save As. The Save GPS207 Config File form will be

displayed.

Figure 31: Save GPS-207DC Config File

This is the typical Windows save file dialog. Navigate to the folder where you wish to save the file. Enter

the file name and click on Save. The GPS207DC configuration file extension (.207) will automatically be

appended onto the file name that was entered.

4.2.4 Exit

To exit the GPS207S_ExPwr application select File and then Exit. A prompt will be displayed to save the

current configuration. It is highly recommended that the configuration be saved the first time the

application is configured. Otherwise the Com Port will have to be configured again next time the

application is used.

Figure 32: Save Current Configuration Dialog

Note – the GPS207S_ExPwr application can also be closed by clicking on the Exit button or the red X in

the upper right corner of the main application form.