Specifications

Page 10
PROGRAMMING SPECIAL FUNCTIONS -continued
Summary of Manual Dialing
Press any key to generate that DTMF digit.
Press "*" or "#" to send ANI-UP or ANI-DOWN, if programmed.
Summary of Autodialing
To send a pre-programmed number sequence from a memory location, press the applicable key 1-8 to autodial.
To store a number in a memory location: press 9 plus the memory location (1-8) plus number, and then press PTT
switch to store.
Press "*" or "#" to send ANI-UP or ANI-DOWN, if programmed.
Summary of "Store and Send" Manual Dialing
Press the "0" key and then the number to accumulate in memory. Then press the PTT switch briefly to send the
number sequence.
Summary of Timed Manual Dialing
Press the "0" key and within 2 seconds enter the desired telephone number. The transmitter will unkey 2 seconds
after the last digit is sent.