User Manual

9
ASSEMBLY INSTRUCTIONS
PIVOT SHOE
SLIDING THE SHOE IN OR OUT (Fig. 2a)
For maximum control and longer blade life, the
base assembly slides in or out to adjust the
effective stroke length.
1. Unplug the reciprocating saw from the
power supply.
2. Loosen the two shoe-adjustment screws
with the hex key (supplied), and slide the
shoe to the desired position. The shoe can
be locked in any position.
3. Tighten the shoe-adjustment screws to lock the shoe in the desired position.
PIVOTING THE SHOE (Fig. 2b)
The shoe pivots to provide maximum control
against the surface being cut.
1. Unplug the reciprocating saw from the
power supply.
2. Hold the saw firmly, and then pivot the shoe
to the desired angle.
Fig. 2b
Pivot shoe
Fig. 2a
Pivot shoe
WARNING!
• To avoid injury and damage, do not operate the saw without the pivoting shoe. The spindle may
strike against the workpiece and damage the reciprocating mechanism.