User's Manual

certgate GmbH
10 / 17
1.
2.
1.
2.
3.
4.
5.
6.
7.
8.
AirID Central App - a management software for your AirID forming the basis for usage of the device. The tool provides you with information and
setting options for your AirID when your reader is connected to your device.
AirID drivers, which ensures the communication between the AirID and the operating system, must be installed additionally depending on the
platform or is already integrated in the Apps and solutions of third party vendors.
AirID can be used with different terminals and platforms, but not in parallel operation.
5.1. Windows
The use of AirID under Windows is only possible as of Windows 8.1 due to the Bluetooth Low Energy functionality required. For use under Windows 7, an
is additionally required.ONEKEY BRIDGE
5.1.1. Installation and Pairing
Download the latest installer (zipped .msi file) for Windows at .AirID - Software, Driver & SDK
Unzip and double click on the .msi installer file.
Follow the instructions in the installation wizard.
The AirID Windows driver and the AirID Central App are now installed.
Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing
. the right button The AirID should display:
Open Windows " ". Your AirID should be listed with its serial number. Press " "Settings Devices Bluetooth Pair
Compare the 6 digit pairing key shown on AirID display with the pairing key on the Windows 10 PC. If the PIN
matches press on the Windows 10 system and choose on the AirID Connect Yes by scrolling down in the menu and pressing the right button
After succesful pairing, " " and the AirID serial number will be displayed on the Windows system and the device name Your device is ready to go!
of the paired device will be displayed on the AirID.
The AirID can now be used.
If there are any problems with the pairing process, restart the process. If necessary, delete the stored pairing information (see 5.1.2 "Deleting
the Connection")