Service manual

Drive Fan Assembly
4-2 Revision L 96022
StorageTek Protected
■ Drive Fan Assembly
The drive fan assembly, 1565056xx, is on the drive door. You can use the “Hardware
Monitor” menu on the operator panel to determine which fan has failed.
Use the following procedure to replace the drive fan assembly.
Figure 4-1. Drive Fan Assembly Replacement (L201_237)
1. Review the information under “Preparation” on page 4-1.
2. Remove the two screws attaching the outer fan finger guard to the drive door.
1. Screws
2. Rivets
L201_238
1
2