Service manual

96022 Revision L 2-17
StorageTek Protected
Using the Clean Menu
Note: When a cleaning cartridge in the reserved cell has exceeded the warning count,
the operator panel displays an asterisk (*) in the library ready status line.
Viewing the Cleaning Cartridge Information
The Cleaning Cartridge Information Menu gives you details of the media
type, cartridge code, and the usage count of the cleaning cartridge in the cleaning cells.
Below is sample display of the Cleaning Cartridge Information:
DLT CLN123 4
DLT is the media type.
CLN123 is the cartridge code.
4 is the number of times the cleaning cartridge has been used (usage count).
Note: If the usage count reaches the warning count set for the cleaning cartridge,
EXP (expired) appears as the usage count.
CAUTION:
Take precautions with used cleaning cartridges. When you place a
cleaning cartridge into the library for the first time, the library indicates a
usage count of 0. When the usage count exceeds its limit, you must
replace it with a new one.
To view the cleaning cartridge information:
1. Press the
MENU button to display the Main Menu.
2. Press the arrow button until the > sign lines up with Clean.
3. Press the
SELECT button. The Clean Menu appears.
4. Use the arrow button to line up the > sign with the appropriate drive’s Clean
Cart Info.
5. Press the
SELECT button. The Clean Info Menu appears.
6. Press the
MENU button to return to the Clean Menu.