Service manual

Using the Clean Menu
2-16 Revision L 96022
StorageTek Protected
The following table describes the Clean Menu information:
Setting the Cleaning Cartridge Warning Count
Cleaning cartridges have a limited life span. After multiple uses, replace the cleaning
cartridge and dispose of it at your site.
If Auto Clean is On, use the operator panel to set the maximum number of times a
cleaning cartridge can be used (or the “warning count”). Refer to your drive vendor’s
publication and Web site for the recommended use and life of the drive’s cleaning
cartridge.
To set the warning count for a cleaning cartridge:
1. Press the
MENU button to display the Main Menu.
2. Press the arrow button until the > sign lines up with Clean.
3. Press the
SELECT button. The Clean Menu appears.
4. Use the arrow button to line up the cursor with the appropriate drive’s Set Warn
Counts option.
5. Press the
SELECT button. The screens turns into the edit mode and the cursor lines
up with the selected drive’s warning count.
6. Use the up and down arrow buttons to change the value of the warning count.
7. Press the
SELECT button to save the changes. You may press the MENU button to
abort.
8. Press the
MENU button to return to the Clean Menu.
Table 2-12. Clean Menu Information
Option Description
Drive to
Clean
The drive selected for cleaning.
Set Warn
Counts
The number of times you want to use the cleaning cartridge for
the selected drive before the library exports a new cleaning
cartridge through the CAP. For more information see
“Setting the Cleaning Cartridge Warning Count” on page 2-16.
Clean Cart
Info
A screen that lists the details of all the cleaning cartridges in the
library (for example, usage count). For more information, see
“Viewing the Cleaning Cartridge Information” on page 2-17.
Import Clean
Carts
A procedure for moving cleaning cartridges from the CAP to the
cleaning cells.
Export Clean
Carts
A procedure for moving cleaning cartridges from the cleaning
cells to the CAP.