Service manual

96022 Revision L 2-15
StorageTek Protected
Using the Clean Menu
14:46:14 is the time the FSC occurred. The fields, from left to right, are hour,
minutes, and seconds.
■ Using the Clean Menu
The Clean Menu provides information about the library’s cleaning cartridges. The
menu allows you to change the warning count for each type of cleaning cartridge and
import/export cleaning cartridges. It also lets you check the number of times a cleaning
cartridge has been used. The information displayed in the Clean Menu depends on
whether Auto Clean is On and a valid cleaning cartridge is in the designated cleaning cells.
To view the Clean Menu:
1. Press the
MENU button to display the Main Menu.
2. Press the arrow button until the > sign lines up with Clean.
3. Press the
SELECT button. The Clean Menu appears.
The following table describes how the Clean Menu works:
Table 2-11. Clean Menu Criteria
If On selecting a drive to clean
Auto Clean is On and no
cleaning cartridge is in the
cleaning cells
The message No Clean Cartridges
Import one or more to Clean is displayed.
Do the following:
1. Use the operator panel to return to the library status
screen.
2. Open the CAP and insert a valid cleaning cartridge
for the drive being cleaned.
3. Return to the Clean Menu.
Auto Clean is Off and no
cleaning cartridge is in the
cleaning cells
The message No Clean Cartridges
Import one or more to Clean is displayed.
Follow the procedure given above to insert a valid
cleaning cartridge in the CAP for the drive being cleaned.
Auto Clean is Off Only the drive to clean is displayed.
Auto Clean is On and
more than one cleaning
cartridge is in the CAP
Select the Import Clean Carts option.