Service manual

96022 Revision L 2-13
StorageTek Protected
Monitoring the Operator Panel for Messages
If desired, you can press SELECT to clear the highest temperature. The display will
show the current temperature.
Note: If you did not set the warning and shutdown temperatures during configuration,
the display will show only the current and high temperatures.
To view the Hardware Monitor information:
1. Press the
MENU button to return to the Main Menu.
2. Press the arrow buttons until the > sign appears to the left of Hardware
Monitor.
3. Press the
SELECT button. The Hardware Monitor Menu is displayed.
4. Use the arrow buttons to scroll through the information.
Viewing the Status of the CAP
To view the status information for the CAP, look at the second line in the display.
Table 2-8. Hardware Monitor Status Messages
Message Meaning
Current Temp: 26 The current Celsius temperature of the library.
High Temp: 27 The highest Celsius temperature of the library since the
last time this field was reset.
Fans: OK The LLC card fan and drive fans are functioning.
Fans: Fail
!Drive Slot 0 Fan
The Drive Slot 0 fan is not functioning, for example.
Power: OK The power supplies are functioning.
Power: Fail
!Top Left
The top left power supply is not functioning, for
example.
Warn Temp: The number that was set during configuration.
Shutdown Temp: The number that was set during configuration.
Table 2-9. CAP Status Messages
Message Meaning
CAP: Open The CAP is open.
CAP: SELECT to Open The CAP is closed.
CAP: Opening The robot is opening the CAP.
CAP: Locked The client server has issued a software
command that locks the CAP until a
previous command is completed.