Service manual

96022 Revision L 2-11
StorageTek Protected
Monitoring the Operator Panel for Messages
Viewing the Status of the Personality Module
Viewing library personality information lets you determine the library’s capacity, vendor,
and how the library’s name and vendor name appear on a SCSI interface.
To view the library’s personality module information:
1. Press the
MENU button to return to the Main Menu.
2. Press the arrow buttons until the > sign appears to the left of Personality
Module.
3. Press the
SELECT button. PERS MODULE MENU is displayed.
4. Use the arrow buttons to line up the > sign with PERS MODULE INFO.
5. Press the
SELECT button.
6. Use the arrow buttons to scroll through the information stored in the personality
module.
7. Press the
MENU button twice to return to the Main Menu.
Note: Use the INSTALL UPGRADE portion of the PERS MODULE MENU only
when you want to upgrade your library. Your upgrade kit includes instructions
for this procedure.
Table 2-7. Personality Module Status Messages
Status Item Status Message Explanation
Status: Validity of the personality module.
PRESENT A valid personality module is attached to the LLC card.
NOT PRESENT A personality module is not attached to the LLC card.
UNKNOWN Valid vendor information has not been loaded into this library.
Type: Vendor information and whether you can install a feature.
Normal Normal operating data is available.
Upgrade You can use the personality module attached to the LLC card
to install a feature. This type of personality module is an
upgrade module, and is available through a conversion bill.
See “Adding Cell and Drive Capacity” on page 2-27.
Used
Upgrade
The feature on the attached upgrade module has already been
installed on a library.
Write in
Progress
The installation of the information from the personality
module has been interrupted. The personality module is no
longer valid.
Version: Version number for the personality module.