Service manual

96022 Revision L 2-3
StorageTek Protected
Operator Panel Menus
■ Operator Panel Menus
Use the buttons on the operator panel to access the library menus. Press the MENU
button to view the Main Menu. To view submenus, use the arrow (▲ ▼) buttons to move
the cursor to any menu and press the
SELECT button to view that menu.
The Main Menu’s options are:
•Door Operations
•Diagnostics
• CAP Contents
•Lib Info/Cfg
•Network Info/Cfg
•Drive Info/Cfg
•Personality Mod
• Hardware Monitor
•Clean
■ Configuration
After initialization is completed, you can configure the library and drives. The following
paragraphs and tables describe the configuration entries. Check off the tasks in the list as
you complete them.
As you enter configuration information, record your choices in Table 2-16 on page 2-28.
When you are done, make a copy of the table and give it to the customer.
Use the operator panel buttons to enter information in the following menus to configure
the library:
•Library Info/Cfg
•Network Info/Cfg (if you use Library Status)
•Drive Info/Cfg
• Hardware Monitor (to set the warning and shutdown temperatures)
❑
1. “Configuring the Library” on page 2-4
❑
2. “Configuring the Drives” on page 2-6
❑
3. “Configuring the Network” on page 2-7
❑
4. “Setting the Warning and Shutdown Temperatures” on page 2-8