Service manual

Operator Panel Components
2-2 Revision L 96022
StorageTek Protected
Buttons
The operator panel has four buttons:
Indicators
The operator panel has three indicators:
MENU This button toggles operation between the Main Menu and the initial
status display. It also returns you to the previous (higher level) menu
from a submenu.
SELECT This button chooses the option next to the cursor (>) shown in the
status display. In a data field, this button moves the cursor to the next
character. You must press this button until you come to the end of the
character line to move on to the next field.
▲
▼
The ▲ (up) and ▼ (down) buttons move the cursor to the selection
you want in a menu screen. When the cursor is in a data field, the
arrows increase and decrease the values of the numbers and letters
shown in that field.
LIBRARY
ACTIVE
This green indicator flashes when the LLC card is active.
CAP OPEN This amber indicator is lit when the CAP door is open.
SERVICE
REQUIRED
This red indicator is lit when operator intervention is required. Check
the operator panel display for messages.
If the indicator is lit solidly and not flashing, use the Diagnostics menu
to see the fault symptom code (FSC).
This indicator flashes if:
• One or more fans fail
• The temperature reaches the warning threshold
• A power supply fails