Service manual

Drive Power Specifications
1-20 Eleventh Edition (K) 96022
StorageTek Protected
■ Drive Power Specifications
The following table lists the drive power specifications. Refer to the drive publication and
vendor Web site for updated information.
■ Library Power Specifications
The following table lists the power specifications for the library without drives.
■ Library Dimensions
The following pages show the dimensions and weight for the rack and deskside versions.
Table 1-6. Drive Power Specifications
Drive Volt-
Amperes
Current Heat output
DLT1 38 VA 0.30 A at 120 VAC
0.16 A at 240 VAC
130 Btu/hr
DLT 7000E 72 VA 0.59 A at 120 VAC
0.30 A at 240 VAC
256 Btu/hr
DLT 8000 65 VA 0.53 A at 120 VAC
0.27 A at 240 VAC
222 Btu/hr
Super DLT 58 VA 0.47 A at 120 VAC
0.24 A at 240 VAC
198 Btu/hr
HP Ultrium LTO 46 VA 0.37 A at 120 VAC
0.19 A at 240 VAC
157 Btu/hr
IBM Ultrium LTO 69 VA 0.56 A at 120 VAC
0.29 A at 240 VAC
236 Btu/hr
Seagate Ultrium LTO 47 VA 0.38 A at 120 VAC
0.20 A at 240 VAC
160 Btu/hr
Table 1-7. Library Power Specifications
Item Specification
Input voltage 100-240 VAC, single phase
Frequency 50/60 Hz
Maximum library power consumption 1.42 A at 120 V or 0.75 A at 240 V
Maximum heat output 614 Btu/hr
Voltage-amperes 180 VA