Service manual

Views and Locations
1-6 Eleventh Edition (K) 96022
StorageTek Protected
5. Drive 4
6. Drive 3
7. Drive 2
8. Drive 1
9. Drive 0
10. Columns 0 through 3, with 3 on far right
11. Two optional cleaning cartridge cells
12. CAP with removable five-cell magazine
13. Cartridge
Note: From a software viewpoint, the top drive that is installed is Drive 0. If all eight drives are
installed, the top drive is Drive 0 and the bottom is Drive 7.
14. Reserved for Development Engineering
15. Ethernet/Web interface port
16. Library RESET button—use a wooden pencil (never a screwdriver or other electrical conductor) to
press this button
to prevent damaging the button or the LLC card.
17. Electronics module
18. Optional Native Fibre port (card in EM)
Note: From a software viewpoint, the top drive that is installed is Drive 0. If all eight drives are
installed, the top drive is Drive 0 and the bottom is Drive 7.
Figure 1-3. Internal View of Components (L201_289)