Service manual

5-2 Revision L 96022
StorageTek Protected
5. Slide the electronics module back into the frame.
6. Attach the electronics module to the frame with the screws.
Figure 5-1. LLC Card Jumper Location (L201_371)
1. J17—Terminating power
• Left two columns jumpered for ON
• Right two columns jumpered for OFF
2. J16—HVD or LVD/Fibre Channel router operation
•Left two columns jumpered for HVD
• Right two columns jumpered for LVD/Fibre Channel router
3. J18LS—SCSI connection for LVD or Fibre Channel router operation
4. J18D—SCSI connection for HVD differential operation