Service manual

Z Motor

4-50 Revision L 96022

StorageTek Protected

1. Review the information under “Preparation” on page 4-1.

2. Open the front door by using the key to unlock both locks.

3. Raise the hand assembly up the Z shaft and support the hand.

4. Remove the nut threaded on the stud that secures the retention strap to the inside wall of the library.

5. Gently lift the strap up and off the stud.

6. Disconnect the Z motor cable.

1. Stud with nut

2. Retention strap

3. Cable

7. Loosen the two inner front screws from the motor.

1. Screws

L201_232

L201_233