Service manual

Theta Motor

4-48 Revision L 96022

StorageTek Protected

10. Lift the carriage off the motor and remove the motor.

1. Carriage

2. Motor

11. Reverse the steps to replace the FRU.

Note: Leave the two motor mount screws loose until you place the belt over the motor drive pulley.

Pinch the belt to engage the teeth in the belt with the teeth on the pulley. Then, place the belt

over the large drive pulley, and tighten the screws.

12. Go to “Restoring Operation” on page 4-79.

L201_297