Service manual

Operator Panel
4-40 Revision L 96022
StorageTek Protected
Operator Panel
The operator panel, 3136282xx, is recessed behind the right decorative front cover of the
library.
Use the following procedure to replace the operator panel.
Figure 4-11. Operator Panel Replacement (L201_258)
1. Review the information under “Preparation” on page 4-1.
2. Remove the top right decorative cover over the operator panel by grasping the top of the cover and
gently pulling it toward you.
Note: When you replace the cover, align the cover snap pins with the holes in the frame.
1. Cover snap pins (6)
201_307
1