Service manual

96022 Revision L 4-39

StorageTek Protected

LLC Card SCSI Cable Assembly

CAUTION:

SCSI interface problem: Notice whether the cable is connected to J18D or J18LS.

5. Disconnect P18D or P18LS from the LLC card.

1. J18D or J18LS

6. Reverse the steps to replace the FRU.

CAUTION:

SCSI interface problem: Make sure you connect the cable to the correct connector,

P18D or P18LS, or the interface will not function.

Note: The wide part of the cable is on the left side as you face the cable.

7. Go to “Restoring Operation” on page 4-79.

L201_291