Service manual

LLC Card Fan Assembly

4-36 Revision L 96022

StorageTek Protected

1. Review the information under “Preparation” on page 4-1.

2. Remove the LLC card. See “LLC Card” on page 4-30.

Note: Do not remove the LLC card from the mounting plate.

3. Remove the two nuts attaching the fan to the bracket.

1. Nuts

4. Disconnect J40 from the fan and remove the fan.

5. Reverse the steps to replace the FRU.

Note: Use tie wrap part number 175020 to secure the cable to the new fan assembly.

6. Go to “Restoring Operation” on page 4-79.

L201_254