Service manual

Hand and Z Flex Cable Assembly
4-24 Revision L 96022
StorageTek Protected
1. Review the information under “Preparation” on page 4-1.
2. Remove the side cover, if desired, to make it easier to access components in the steps.
3. Starting at the hand, gently open the hand cable fold clip, on the left side.
4. Cut the cable clamp.
1. Hand cable fold clip
2. Cable clamp
CAUTION:
Equipment damage: Carefully pry the tabs to prevent breaking them.
5. Pry the four tabs on the hand guide assembly away from the Z carriage.
1. Tab (4)