Service manual

Hand Assembly

4-18 Revision L 96022

StorageTek Protected

■ Hand Assembly

The hand assembly, 3098760xx is, behind the front door. The camera is a part of the

FRU.

Use the following procedure to replace the hand assembly.

Figure 4-5. Hand Assembly Replacement (L201_262)

1. Review the information under “Preparation” on page 4-1.

2. Open the front door by using the key to unlock both locks.

3. Rotate the hand to the right until it stops.

4. Open the hand clamp that holds the theta motor and LLC to LLJ cables.

1. Clamp

L201_263