Solar Roofing System

Apollo II PV Roofing Systems are
provided as pre-engineered kits
from CertainTeed.
EACH KIT INCLUDES:
•
54 watt, high-efficiency
monocrystalline modules
• Waterproof and fire-resistant
underlayment membranes
• Flashing accessories
• Starter strip and wind clips
• Central string inverter
• Home run wiring
• Monitoring system (optional)
FEATURES AND BENEFITS:
•
Efficiency: 14 high-efficiency
monocrystalline silicon solar cells per
module for a power rating of 54 watts
per module.
• Low profile: The slim profile provides
a clean integrated look that a rack
mounted system cannot match.
• Lightweight: No need for structural
reinforcements or analysis. Each
module weighs only 12 pounds or about
as many pounds per square foot as a
typical asphalt shingle.
• Load rating: Modules are rated to 250
pounds per square foot.
• Wind resistance rating: Apollo II roofing
systems achieve a 110 mph wind
resistance rating.
• Water handling: Water channels
and raised fastener locations further
improve the integrity of Apollo II as a
roofing system.
• Wire management: Open space
under the modules allows for easy
wiring/installation and eliminates the
possibility of wires being pinched
between the module and the roof deck.
• Aesthetics: Black (frame) on black
(cells) on black (backsheet) provides a
greater aesthetic and visually blends
with the surrounding roof.
PV Roofing System