Technical Specifications

Specification Sheet
Carolina Beaded
™
Vinyl Siding
General Description: Reproduced from the classic weatherboard design, Carolina Beaded™ is a uniquely styled siding with
a wide clapboard face highlighted by a distinctive bead at the base of the panel. Carolina Beaded, available in 14 colors, is a
.044" thick brushed single course panel with a 6-1/2" exposure. It features a secure post-formed lock and its 3.4" panel
projection is compatible with all 3/4" pocket accessories.
Carolina Beaded siding is appropriate for use in new construction for single family homes, multi-housing projects and light
commercial developments. Carolina Beaded is also an ideal product for remodeling.
Colors: Carolina Beaded siding profiles are available in a wide selection of colors. All colors are Spectrophotometer
controlled and utilize exclusive PermaColor™ color science.
Colonial White Granite Gray Light Maple Sandstone Beige Snow
Cypress Heritage Cream Natural Clay Savannah Wicker Sterling Gray
Desert Tan Herringbone Oxford Blue Silver Ash
STUDfinder™: The patented STUDfinder Installation System combines precisely engineered nail slot locations with
graphics. Nails
are positioned 16" and 24" on center to allow for alignment with studs. STUDfinder graphics centered directly under each
slot provide a quick and easy guide to help locate studs.
Lock: Carolina Beaded siding panels feature a secure fitting post-formed lock popular with installers for its locking
assurance and trouble-free handling.
Accessories: CertainTeed manufactures a wide range of siding accessories which are compatible with Carolina Beaded
siding styles and colors. Accessory products include installation components, soffit, window and door trim, corner lineals,
corner systems and decorative moldings.
Composition: Carolina Beaded siding products are produced using CertaVin™ custom-formulated PVC resin. This resin is
produced exclusively by CertainTeed, allowing CertainTeed to maintain the high quality of its siding products.
CertainTeed’s Carolina Beaded siding is in compliance with the ASTM Specification for Rigid PolyVinyl Chloride (PVC)
siding D 3679.
Technical Data: Carolina Beaded siding meets the weathering standard in ASTM D 3679 using ASTM D 1435 procedure.
As shown in Table 1, Carolina Beaded siding is in compliance with ASTM Fire and Smoke procedures and meets or exceeds
International Building Code requirements.
Table 1
ASTM E 84 Flame Spread Index 20
Fuel Contribution 0
Smoke Development Index 390
ASTM D 1929 Self-ignition temperature 813°F
ASTM E 119 Fire Endurance Classification of 1 hour rated
ASTM D 635 Material is self-extinguishing with no measurable extent of burn when tested in accordance with this specification.
UBC 26-4 Multi-Story Flame Test - indicated CertainTeed vinyl siding does not contribute to the spread of fire in a multi-story
situation.
NFPA 268 Radiant Heat Test - Ignition Resistance of Exterior Walls - Conclusion that CertainTeed met the conditions for
allowable use as specified in section 1406 of the International Building Code.
Important Fire Safety Information: When rigid vinyl siding is exposed to significant heat or flame, the vinyl will soften,
sag, melt or burn, and may thereby expose material underneath. Care must be exercised when selecting underlayment
materials because many underlayment materials are made from organic materials that are combustible. You should ascertain
the fire properties of underlayment materials prior to installation. All materials should be installed in accordance with local,
state and federal Building Code and fire regulations.