User Guide
Table Of Contents
2
Overview
1
Power switch
2
Power indicator lights
3
Master ON/OFF switch
4
DC 12V output
5
USB output 5V/2.1A
6
EC5 output for jump starting
7
LED lights
8
15V/1A input
Operation
Indicator Lights
Press the power switch lightly to check the remaining battery capacity.
Indicator
Lights
4 Off
1 Solid ON
2 Solid ON
3 Solid ON
4 Solid ON
Capacity
0%
25%
50%
75%
100%
While the jump starter is being charged, the indicator lights will flash one by one until it is at
full charge. All 4 indicator lights will stay on when the jump starter is fully charged.
How to Turn on the LED Light
Press and hold the Power button for 3 seconds to turn on the LED light. Once the LED light is
turned on, double pressing the power button will cycle through additional modes.
(Solid lightStrobe lightSOS flashingOFF)