Specifications

949.715.1534 CERNOGROUP.COM
in collaboration with
walnut Aeris 54
02 ARCHITECTURE
The Aeris was a collaboration with New York based
designer Frank Carfaro of Desiron. The organic and often
wild swirls of walnut grain are interrupted by rigorous slits
and inlays that punctuate each face to create a beautiful
juxtaposition, making each xture unique. The glow of the
illuminated wood seen through the cut slits creates a rich
composition of light and shadow.
Nick Sheridan
Co-Designer
Aeris 30 / Aeris 54
linear pendant
Aeris 30 dimensions - 30” x 6” x 8” H
Aeris 54 dimensions - 54” x 6” x 8“ H
Solid wood, aluminum
Aeris 30 weight - 11 lbs, Aeris 54 weight - 15 lbs
Energy ecient LED light source
Light output - 1720 lumens
[Down light - 1030, Up light - 690]
Light color - 2700 K (warm)
Color accuracy - 90+ CRI
LED power consumption - 16W
Input voltage - 120V
Dimmable (use ELV or TRIAC dimmer)
Linear canopy included
Wood canopy covers are now available
Walnut canopy cover: part #60-130-005W
Dark Stained Walnut canopy cover: part #60-130-005D
See page 36 for more canopy information
6’ drop length, field adjustable
Suitable for a sloped ceiling
Wood grain will vary
Specifications subject to change
MATERIAL & FINISH OPTIONS
Aeris 30 part # 07-110 - ____
Aeris 54 part # 07-100 - ____
Metal Finish:
brushed aluminum (CM-006) A
black anodized aluminum (CM-007) B
Wood Body:
walnut (CM-001) W
dark stained walnut (CM-002) D
Alternate input voltages available
8”
4.125”
1.5”
54”
6”
Dark Stained Walnut
(CM-002)
Black Anodized Aluminum
(CM-007)
20.5”
8”
15.375”
30”
1.5”
4.125”
6”
Aeris 54
20.5”
15.375”
©2016 Cerno, L.L.C. All Rights Reserved. The Cerno graphic is a
registered trademark of cerno, L.L.C. Cerno reserves the right
to change specications for product improvements without
notication.
Non-pictured nish options