User`s manual

84
9.3 Network Utility
The administrator can diagnose network connectivity via the PING or TRACEROUTE utility.
Please click on Utilities -> Network Utility and follow the below setting.
 Ping : This utility will help ping other devices on the network to verify connectivity. Ping
utility, using ICMP packets, detects connectivity and latency between two network nodes.
As result of that, packet loss and latency time are available in the Result field while running
the PING test.
 IP/Domain : Enter desired domain name, i.e. www.google.com, or IP address of the
destination, and click ping button to proceed. The ping result will be shown in the Result
field.
 Count : By default, it’s 5 and the range is from 1 to 50. It indicates number of connectivity
test.
Traceroute
Allows tracing the hops from the 100GX-N device to a selected outgoing IP address. It should
be used for the finding the route taken by ICMP packets across the network to the destination
host. The test is started using the Start button, click Stop button to stopped test.
 Destination Host : Specifies the Destination Host for the finding the route taken by ICMP
packets across the network.
 MAX Hop : Specifies the maximum number of hops( max time-to-live value) trace route
will probe.
9.4 Reboot
This function allows user to restart system with existing or most current settings when changes
are made. Click Reboot button to proceed and take around three minutes to complete.